Anthem M1單聲道後級

加拿大的Anthem在多聲道領域具有技術領先地位,在擴大機的設計上,也有獨到一面。很少有擴大機能夠像他們一樣,端出這樣驚人的性能規格。
怎麼個驚人法?Anthem M1單聲道後級,在對應8歐姆負載下,可以輸出1000W的功率,當負載阻抗降到4歐姆,輸出功率就倍增到2000W。
而且,在高輸出功率下,還能維持低失真,這就更不容易。
根據原廠公布的數據,M1在10W輸出以內,失真率僅有0.01%,這還不稀奇,驚人的在後頭,100W輸出下,總諧波失真率還小於0.03%,就算是1000W全功率輸出,失真率還是維持在0.06%以下,這的確是世間罕見。

器材規格
型式:單聲道後級
頻率響應:20Hz~20KHz(+/- 0.1dB)
輸出功率:1000W(8Ω)、2000W(4Ω)、2400W(3Ω)
總諧波失真(@1 kHz, 8 Ω):0.01%(1W、10W);<0.03(100W);<0.06(1000W)
訊噪比:113dB
電壓增益:29dB
阻尼因數:800~1400(取決於頻率)
尺寸:483 x 476 x 57 mm (W x D x H)
重量:9KG

M1 Specifications |
|
![]() |
|
| Power Output continuous, 20 Hz to 20 kHz, <0.1% THD+N | |
![]() |
|
| 8 Ω | 1000 W |
![]() |
|
| 4 Ω | 2200 W |
![]() |
|
| 3 Ω | 2400 W |
![]() |
|
| 2 Ω | >2000 W depending on line voltage regulation |
![]() |
|
| With 120V AC supply the amplifier’s maximum output into impedances 4 Ω and lower, as well as its maximum duration, vary depending on line voltage regulation. | |
![]() |
|
![]() |
|
| Frequency Response 20 Hz to 20 kHz | |
![]() |
|
| Open circuit | +/- 0.1 dB |
![]() |
|
| 8 Ω | +/- 0.1 dB |
![]() |
|
| 4 Ω | +/- 0.1 dB |
![]() |
|
| 2 Ω | +/- 0.2 dB |
![]() |
|
![]() |
|
| Power Bandwidth 1000 W at 8 Ω | 5 Hz to 45 kHz |
![]() |
|
| THD+N at 1 kHz, 8 Ω | |
![]() |
|
| 1 W | 0.01 % |
![]() |
|
| 10 W | 0.01 % |
![]() |
|
| 100 W | <0.03 % |
![]() |
|
| 1000 W | <0.06 % |
![]() |
|
![]() |
|
| IMD 19 kHz + 20 kHz, CCIF | 0.003% |
![]() |
|
| S/N Ratio ref. 1000 W, IEC-A | 113 dB |
![]() |
|
| Voltage Gain | 29 dB |
![]() |
|
| Input Sensitivity | 100 mV for 1 W output, 3.2 V for 1000 W output (8 Ω) |
![]() |
|
| Input Impedance | 10 kΩ (RCA), 20 kΩ (XLR) |
![]() |
|
| Damping Factor | 800 to 1400 depending on frequency |
![]() |
|
| XLR Configuration | Pin 1: Ground, Pin 2: Positive, Pin 3: Negative |
![]() |
|
![]() |
|
| POWER REQUIREMENTS | <1 W |
![]() |
|
| Consumption in a typical music/theater installation | <2 W |
![]() |
|
| standby mode, 120V mains | 33 W |
![]() |
|
| standby mode, 240V mains | 300 W |
![]() |
|
| operate mode, idle | |
![]() |
|
| typical operation | |
![]() |
|
| Where mains voltage is 120V, one dedicated 15A circuit per amplifier is recommended depending on speaker. A 20A circuit is adequate for two amplifiers playing music where speaker impedance is 8 Ω. This product operates from a single phase AC power source that supplies between 108V and 264V at a frequency of 50 or 60 Hz. | |
![]() |
|
![]() |
|
| DIMENSIONS | |
![]() |
|
| Height with feet | 2 1/4 inches (5.7 cm) |
![]() |
|
| Height without feet | 1 rack unit |
| Width standard handles | 19 1/4 inches (49 cm) |
![]() |
|
| Width rackmount handles | 19 inches (48.3 cm) |
![]() |
|
| Depth | 18 3/4 inches (47.6 cm) |
![]() |
|
| Weight (unpacked) | 20 lb (9 kg) |
** 本店有實體店面/視聽室,歡迎試聽 **







